Exchange Server databases’ transactions are temporarily stored in transaction log files. At times, you need to remove these files manually, usually when the disk runs out of space or the circular logging is disabled. If you come to such situations, it is recommended to determine that the logs have been committed to database or otherwise will cause problems. The database usually shows Dirty Shutdown state in such cases. However, the other reason for this is that database is corrupt. If it is, you should look for Exchange Recovery solutions.

You can take the following situation when you try to mount an Exchange Server database. In an attempt of mounting the database, you might receive an error as below:

An internal processing error has occurred. Try restarting the Exchange System Manager or the Microsoft Exchange Information Store service, or both.

ID no: c1041724
Exchange System Manager

The mount operation fails after you receive this error message.

Cause

Error c1041724 can be encountered if you have run eseutil /p repair utility on the affected database. At this point if Eseutil log files remain intact and are not removed, the database can fail to start with the above error.

Solution

To isolate the issue, you need to proceed as follows:

1.You need to first check if eseutil /p command was run. To do so, you should run eseutil /mh command for pub1.edb and priv1.edb and check the repair count value. If it is other than ‘0’, this shows that the command was run.
2.From the previous step, you also need to check for the database consistency. If it exists in Clean Shutdown state, which shows that the log files have been committed, you can safely remove the log files from Exchange Server folder, Mdbdata folder to a backup folder and mount the database.
3.If the database shows ‘Dirty Shutdown’ state, it may be because either all the log files have not been committed yet or the database is corrupt. You can wait for sometime to determine if uncommitted transactions is the case. If not, the database is corrupt that you need to restore from backup or by performing soft recovery.

In cases when database remains corrupted with no access to a suitable backup, you can use third-party Exchange Server Recovery utilities. These special applications allow safe extraction of user mailboxes without any modification to the original content. Exchange Recovery utilities provide you interactive design plus impressive features to experience.

Stellar Phoenix Mailbox Exchange Recovery is a complete tool that repairs Exchange database repair systematically. It is a safe and powerful Exchange Server Recovery tool that supports Exchange Server 5.5, 2000 and 2003. The tool can restore mailboxes in individual .pst files, which can be directly accessed in Outlook. The software is enriched with a realistic approach to repair corrupted EDB file in each instance.

Around, 80{d2aefe2ef0226cc11a42265ff06bef790048f35eeb2849b579402b9661ec89b7} of the injuries in the workplace are back injuries due to heavy lifting. This can be more common in a data centre, as the majority of rack mount equipment, like servers are extremely heavy items of equipment. In order to reduce the likelihood that injuries would occur, the use of a server lift can be incorporated into your work environment.

Like any piece of equipment on the market, there are a lot of choices, so choosing the correct piece of equipment is vital to the smooth running of your company. Many of the data centres where we work tend to be rather cramped and the areas between the server racks can be quite narrow. The SL500 server lift has a great advantage over its competitors as the footprint of the machine is really small. The SL500 server lift width is just 24 inches, so manoeuvring through slim isles is made a lot easier with this equipment.

An important factor when choosing a new server lift is to make sure it meets the current OSHA (Occupational Safety and Health Administration) guidelines that are set out. The SL500 server lift meets and in some cases, exceeds those guidelines. This can not only assist you in making sure that your workplace is as safe as possible but if used properly, it is highly unlikely that any accidents are going to occur.

As far as the weight that the SL500 server lifter is able to handle, the maximum is 500 pounds. So what about the height it can lift to, the SL500 server lift can lift equipment to a height of 8 feet, making it very convenient to lift equipment to the higher levels in your racks. In addition, you can also lift other items such as heavy batteries and with the included strap handles, remove items safely from a box with the use of this server lift.

The controls that operate the SL500 server lift are not only easy to understand and use, but extremely easy to manoeuvre heavy equipment very precisely in to and out of your racks. The brake/stabilizer locking system helps to keep the server lift in place while you are positioning the equipment.. The onboard controls supply you with the ability to manoeuvre any item into very small places, so that the server or any other hardware can be slid into the rack conveniently.

Selecting the right server lift can not only help you to make sure that your working environment is safe, when you choose the SL500, you’re also giving yourself an efficient piece of equipment that your entire workforce will appreciate.

The SL500 is definitely a piece of equipment to think about as it ticks the right boxes and gets the job done.

IT Outsourcing is team of young IT professionals dealing with problem occurring in computers and related products. These IT guys take the calls form customer and provide them solutions for there problem. There major work includes finding the problem, analyzing the causes and finally eliminating them for smooth running of applications. Almost every corporate engaging these young IT guys to work for them as outsourcing agents to promote the customer relations. With tough competition it is important for every company to have harmonious relation with there customers and it possible only if they able to provide best services to there customers. With outsourcing help desk the companies get benefited as they need not worry about the customers query and focused on business on the other hand customer will never feel cheated as they get best services from professional people. This concept of Colocation is that placement of several entities can in a single location.

Companies have many benefits from Dedicated Server Hosting services as it helps in improving operations of the company. Although every company has Data Center and have two option either they can arrange in-house help desk services or appoint third party company as there outsourcing service executive. Rendering services to Third Party Company will let the business to save cost of business and they get potential and professional help desk service providers who will effectively handle help desk tasks. Moreover help desk service provider will provide immediate and critical measure to any issue. Companies are dealing with many internal and external threats and therefore appointing outsourcing help desk provider companies able to shift burden of external threats on Third Party Company. Outsourcing help desk services act as supportive system to any business concern so that entrepreneur concentrate in developing internal processes for future growth. Outsourcing help desk services are feasible option to deal with unknown contingencies of business enterprise.

The Article is written by artmotion.eu providing Dedicated Server Hosting and Colocation. Visit for more information on artmotion.eu Products & Services___________________________Copyright information This article is free for reproduction but must be reproduced in its entirety, including live links & this copyright statement must be included. Visit artmotion.eu for more services!

Web hosting organizations that provide a connection, storage and services by means of a secure and hack resistant server using https and SSL certificates are regarded as to be a secured hosting service. SSL stands for secure sockets layer and is currently probably the most widely accepted protocol in world wide web security. SSL is utilized in conjunction with https, hypertext transfer protocol secure. Https encrypts communication over the net and secures the network web server. Secure server hosting can be a common theme among e-commerce web sites and other websites that accept payments of any form.

Credit card numbers and other extremely sensitive info might be given and transferred over the world wide web in a secure manner. When an internet user connects to a web site employing SSL, the secured server is asked to confirm its identity. This security measure was put in place to guarantee third parties cannot tamper with or eavesdrop on a secured web site, essentially stealing confidential data. In order for this to take place, the web users browser need to have the ability to accept SSL certificates. Currently, most internet browsers are set up to deal with confirmations by default including well recognized browsers like Net Explorer and Firefox.

When picking a secure internet hosting plan it can be critical to take into account storage space, disc space, information transfers, databases and operating systems. The server ought to have the ability to store and transfer information at rates suitable for the client as a way to maintain the site running at a steady and reliable pace. The operating system running the server, whether or not it really is Unix, Linux or Windows must also be regarded as. Other functions to check into are additional space and transfer, E-mail, scripting language, CGI-Bin (custom or prepared), Front Page (extensions for FP), IP Address (unique number), Log Files (line by line detail), Statistics (summaries) and functions included within the control panel.

Its also important to think about set up time. How long it will take to obtain a website up and going as soon as connection to the server has been established? Furthermore to set up time, price consideration is just as critical. What are the payment terms and how much are the fees? Make a checklist of ought to have functions and select a secure server hosting plan that consists of them all.

This is a comprehensive guide or bunch of tips to Optimize WordPress Running on Dedicated Server. Though Dedicated Server is becoming a historic hosting option as Cloud Servers are currently dominating the most of the useful and successful blogs, still there are users who use dedicated servers and these few tips to optimize WordPress might help them.

Tips to Optimize WordPress Running on Dedicated Server – Reduce the Database Server’s burden/b>

In case of a dedicated server, the database server is actually running on the same physical server and using the same physical resource. MySQL has gone away, 508 resource limit reached messages are quite common due to increased number of plugins which are eating up the php memory. In case of a Dedicated Server, you frankly can not increase the php memory after a limit, which a Cloud Server easily can do as the cloud server’s RAM and Bandwidth is virtually not limiting.

These happens probably due to the fact, all the plugins try to use wp-cron.php or other same core file simultaneously. To avoid it, use database cache plugin plus reduce the number of not-so-needed plugins. If you need to reduce a plugin, which is SEO wise harmful – try to increase the php memory.

Tips to Optimize WordPress on Page Speed Score

Your WordPress blog should load within 2 – 3 seconds with a Page Speed score (by WebPageTest) should be over 90/100.
Using a Content Delivery Network, a Cache Plugin, some htaccess tricks can do it easily. All these, directly reduces the load on the main server.
Use an optimal theme, Thesis and Genesis framework with optimized child theme are among the best performers. Read our previously published tips to Optimize WordPress on the page speed front.
Use a cache server if needed

Tips to Optimize WordPress on the backend

Its quite bad if the WordPress backend is slow despite the fronend is fast – it simply increases your fatigue. You can use CDN to offload the static files, increasing the php memory.

Tips to Optimize WordPress Running on Dedicated Server

Frankly, there is no meaning to use a dedicated server for a WordPress blog now. Cloud Server and cloud Hosting from Rackspace or other reliable hosting brands not only reduces the cost, but also gives the pay as you go model, ensuring that your WordPress will never be short of Physical RAM or Bandwidth.

Dedicated server is probably a good option where a bit more security is needed – our usual blogs has nothing to hide, all pages are actually public; but still for a secure server, one must think of a colocation server rather than a dedicated server.

Also, a Virtual Dedicated Server is a very good cheaper alternative, sometimes a VPS can outperform a Dedicated Server at the same cost or less.

Read more: Tips to Optimize WordPress Running on Dedicated Server
Original source: The Customize Windows

As the servers are used constantly, they generate tremendous heat. When this heat increases beyond control, it may lead to damage of the devices and equipment. Being machines, the computers are delicate under the hood and are prone to damage due to carelessness. System crashes, reboots, hang-ups, untimely failures; poor performance and other problems can be created due to abnormal temperatures. Now, one way to keep these issues under control is to maintain the server room’s temperature. Sufficient ventilation, cooling and maintained temperature are the efficient ways to protect computers and servers.

Maintaining the temperature

The computers used at homes and for small offices come with internal cooling devices, which usually keep the desktops and laptops cool. Nevertheless, the server rooms that manage a number of systems do not have sufficient internal cooling systems. They have to be kept cool using an external cooling source, such as portable air-conditioner. Secondly, increased humidity inside the enclosed area can cause corrosion or rust. The maximum humidity level of a server room should not exceed 40 to 50 percent.

Are portable air conditioners good solutions for cooling?

The temperature of the server room should be steadily cool around-the-clock. If the room or storage area is connected to the central cooling systems, they may be shut down during the weekends or sometime late at night, depending upon the company’s working hours. If the cooling systems fail, the computer systems are prone to face the brunt.

Portable air-conditioners keep the server rooms cool, as the temperature can be controlled individually depending upon the outside temperature. There are few air-conditioners that adjust the temperature according to the outside temperature on certain modes. They are self-contained units which do not require permanent installation. Business owners can move these units anywhere as required.

A portable AC used in such places must have condensation tank to manage the humidity level, automatic restart function and proper ventilation to replace the hot air inside the room. These features not only keep the servers cool but also regulate fresh air and keep the machines working continuously. The automatic function keeps the air conditioners working continuously even when there is a power cut or failure.

When it comes to the size of the air conditioners it is never an issue. The server closet of size 9000 to 12000BTU will be sufficient for the unit to fit in. While a 12K BTU unit requires 9 to 12 amps a huge unit of 14000BTU requires 20 amps. The air-conditioner should be thoroughly checked for the necessary requirements before installation.

A microcontroller is a computer-on-a-chip or a single-chip computer. Micro suggests that the device is small and controller tells you that the device might be used to control objects, processes or events. Another term to describe a microcontroller is embedded controller because the microcontroller and its support circuits are often built into or embedded in the devices they control. You can find microcontrollers in all kinds of things these days. Any device that measures, stores, controls, calculates, or displays information is a candidate for putting a microcontroller inside. The largest single use for microcontrollers is in automobiles. Every car manufactured today includes at least one microcontroller for controlling the engine and additional systems in the car. In desktop computers, you can find microcontrollers inside keyboards, modems, printers and other peripherals. In test equipment, microcontrollers make it easy to add features such as the ability to store measurements, to create and store user routines and to display messages. Consumer products that use microcontrollers include cameras, video recorders, compact-disk players and ovens.

The Intel 8051 microcontroller is one of the most popular general purpose microcontrollers in use today. It is about 30 years old and still very popular. One of the reasons for popularity of 8051-based microcontrollers is the availability of many excellent compilers, from freeware applications to high-priced professional development tools. The memory structure of the 8051 microcontroller is a complicated and you will definitely need an 8051 microcontroller tutorial to go deep into the concept.

The main reason for their great success and popularity is a skilfully chosen configuration which satisfies different needs of a large number of users allowing at the same time constant expansions. Besides, the software has been developed in great extend in the meantime, and it simply was not profitable to change anything in the microcontroller’s basic core. This is the reason for having a great number of various microcontrollers which basically are solely upgraded versions of the 8051 family.

A very popular programming language is C. It is widely used in development of operating systems, desktop applications and embedded systems. Beside assembly language, C is the most popular programming language used for embedded programming. C for 8051 microcontrollers has been the number one choice among programmers. 8051 microcontrollers are no exception. SDCC is the most popular open-source C compiler for 8051 microcontrollers. The importance of such microcontrollers is attracting many a professionals to take up 8051 microcontroller tutorials. These tutorials demonstrate how to code simple input & output. The tutorials assume basic knowledge of programming and electronics. Massive use of embedded microcontrollers encourages engineers and students to join microcontrollers’ tutorial and training for c programming for embedded microcontrollers so that they can grab new opportunities in the process of development.

For more information visit us:- www.c4micros.com

Most bulk mailers suffer the common agony of outgoing emails. Thats because webhosts generally have the outgoing emails capped for a given account. As an example, say you own a blogroll and have a plug-in installed with a view to update your users whenever a new piece is put up.

You are all geared up to direct emails to your subscribers but alas, the webhost plays spoilsport! Why? Your webhost wont permit you to send emails beyond a predetermined daily limit. What do you do?

Bump that!

Turn to Free SMTP Server!

Free SMTP Server: Time-and-Motion Study

Your free SMTP mail server, on its own accord, checks for the Domain Name Registration of the recipient and verifies the validity of the address. Then, the email is passed over to the user DNS, before finally getting delivered to the recipient.

Then, the SMTP configures the email delivery so as to deliver a confirmation message back to the sender. If there is no server to look for these free SMTP mail functions, the sender would never be able put his finger right as to whether his message reached its valid destination or not.

What a Free SMTP Server brings to the table

A Free SMTP server can bring unlimited freedom to bulk emailing. Its a dependable source to run mass email campaigns without ever coming unstuck. The best part is a Free SMTP Server deployed for the purpose of bulk emailing isnt shared between users, making way for faster sending speeds and higher processing power.

Mysendmail Free SMTP Email Server

Mysendmail is a dedicated Free SMTP Server program which delivers emails stunningly fast. You get to send as many as 1000 emails a day, which easily beats the ideal email consumption of small to medium email campaigns.

The Free SMTP Server Advantages

Unbroken Coverage: This Free SMTP email server works virtually anywhere setting up seamless coverage globally.

Beefed Up Security: The SSL encryption hikes the security levels up in a big way resulting in a more secure and speedy email carriage.

Unchallenged Connectivity: Connects to any connection, over any network.

Rich Features: Mysendmail is an unbelievably well- rounded Free SMTP server program with advanced features as email tracking and monitoring, email archiving, password protection, mobile support, and a slew of exceptional features built in.

Flexible Email Plans

To know more about Mysendmail Free SMTP Server, and how to get your device up for the service, please visit:

India has become the most favored destination for web site programming outsourcing. Outsourcing to India offers significant advantages such as technological agility, high-quality, skilled workforce, flexibility, cost effectiveness and faster time to market. All kinds of software programming services could be outsourced to India.

Web sites play a dominant role in online business management and is your key to the virtual world. A personal or business web site should be user-friendly and must necessarily have a user-centered design. Splendid images, animations, video, and audio lend attractiveness to websites. Web site programming refers to a series of procedures which involve conceptualization, planning, modeling, and execution of electronic media delivery via Internet in the form of Markup language, which is suitable for interpretation by Web browser and display as Graphical user interface (GUI).

Offshore outsourcing of web site designing services is increasingly becoming popular because of the numerous advantages it offers. Outsourcing website programming services significantly helps in reducing time, effort and money. The modern market has become extremely competitive and product and service life cycle has considerably decreased. This has resulted in up-gradation and maintenance of existing web sites.

Outsourcing programming services provides its customers an extensive range of offshore outsourcing services to cater to your business requirements. Our broad array of Web site programming services include Database driven web-sites, Portal web-sites, E-commerce solutions such as Shopping Cart, Online payments, Web based Applications such as Search engines, Chat, Email, etc., redesigning of an existing website and designing of Static, Dynamic and Flash web-sites for business purposes. Our competitive edge over other outsourcing firms lies in our low-cost effective professional web site maintenance service. At Outsourcing Programming Services, we provide an exclusive range of web site programming and web designing solutions; from professional corporate websites to e-commerce and micro and flash websites.

We have a dedicated team of well-qualified and highly experienced copy writers, visualizers, Graphic Designers, Front-end and Database Programmers who have proven expertise in working with sophisticated, cutting-edge software tools and technologies such as Windows NT and Linux, Photoshop, Corel Draw, Animation S/W, Flash Dreamweaver, Frontpage, Homesite PHP, ASP, Java, Servlets, Applets, EJB, Perl, JavaScript, WAP, MySQL, MSSQL, Oracle and MSAccess. Our advanced technological tools such as multimedia computer systems, scanners, printers, Web promotion techniques and promotion software and 24 hours internet communication help us deliver services promptly as per your specifications.

Outsourcing Programming Services offers its customers an exclusive horde of advantages including 24×7 promotions of your brand and services, effective medium of promotion, highest level of interaction with your company, and a portable, scalable and easily accessible, marketing tool.

Sometimes, expressions like -the server has broken down’ can cause dread in the network supervisor’s heart. Just as a good parent looks after his or her children even when there is no obvious danger, a good network manager should also observe the servers to confine prospective issues prior to they come about. If we talk about the outsourced IT support, it is a key to the triumph of any company that depends on a network of computers for its everyday operations. For these companies, computer maintenance turns out to be essential.

Let us take a glance on systematic guide to right server maintenance.

First thing the administrator needs to do is intend usual server troubleshooting & maintaining practice. To facilitate the maintenance of the server more proficiently, you require having an average troubleshooting process that you will tag on every time you are maintaining it. Make use of a checklist to help in your troubleshooting & safeguarding procedure. This will avoid you from failing to notice something.

Next important thing is to settle on whether the physical element is carrying out correctly. This takes in inspecting the hardware, cabling arrangement and any connected sideline. Turn off the network cables & cards to assist recognize any errors in the hardware. In case, there is any fresh hardware in the server, then ensure that it is well suited with the operating structure.

After that, you should look out for addressing & routing issues in order to control the traffic. A sincere attention towards the design of your operating structure is important. Standard business networks run on TCP/IP, therefore a faulty TCP/IP setting can cause address & routing problems. Always make certain that your server’s each TCP/IP design is correct.

We know that server applications are typically diverse from applications that are set up on computer units. Usually, the server applications are set up over the operating system and they let you to uphold and watch your server & the computers in the network. You require making certain that these applications are friendly with the essential operating system.

Furthermore, while troubleshooting the print server, you should ensure that your printer is working smoothly and that every connection is safe. Also, make certain that the printer drivers are set-up properly and the print spooler service is operating efficiently. In case of any crash in the computer, hard disk recovery becomes important which only a hardware expert can do.

Michael Philip is an experienced writer, he is writing this time for www.care.net.sg. This is a best IT solutions/service provider in Singapore? Currently Michael writing on different topics like, it support, server maintenance, data recovery Singapore, etc.